Saturday, 29 December 2012

Keeping Warm




Winter has set in quickly here.
Alternating days of snow and cold have provided a real Canadian Winter.
And though we managed to finish up most of the outdoor projects,
the house has yet to be prepared for the cold.







Our home was originally intended as a three season cottage.
There's enough insulation to keep us alive but it takes some extra steps to make it cozy.
Also, the windows are single pane sliders that do little more than keep the snow and wind from blowing in.
They even lack the proper plastic tracks intended to give good action and some weather seal.


So the windows need to be locked and sealed with weather stripping to cut the draft.
Shrinking plastic over the whole window adds an extra buffer against the really cold nights.
Without any attention, the cold air pours in through the window edges.
New windows are on the list of things to do.







The screened-in porch also gets plastic over the screens.
This helps keep the snow out so that our coats and boots have a dry place to stay.
It's nice to have somewhere to strip off Winter clothing before going right into the house.
Adding the sheltered space also adds insulation to the house by protecting the south wall from the prevailing winds.







Of course, we haven't done any of these chores yet, having just finished with some more important jobs.
But the weather forecast is calling for a cold spell and the winterizing tasks have suddenly become more pressing.
The less we do to keep the cold out, the more wood we burn, which is another issue in itself.


But we have come a long way since moving into our home.
The first Winter was not only cold but also wet from the ice dams on the roof.
Escaping heat melts the snow and it runs to the eaves where it freezes.
After the ice builds up, any water begins to accumulate and then creeps into the roof and down into the house.
We had water pouring through windows frames and even into the kitchen light fixture.
Steel roofing and some ventilation changes helped solve that mess.
Those were the days before we put a proper foundation under the house.
The wind would whistle underneath and freeze the shower drain in addition to making for really cold floors.







Regardless of how the indoor climate is,
our home is our shelter.
It kept us safe even when conditions were at their worst.
And though it's still a challenge during the Winter,
we're thankful to be indoors and protected from the wind and snow.
Even if some of it sneaks in through the cracks in the windows.









 

Thursday, 27 December 2012

LEGO for Learning




Auren is five years old.
He has been playing with Lego for quite a long time now.
I remember when he started out with his first blocks.
There was a lot of fumbling and frustration, but within a week of play,
his dexterity caught up to his will.


His bin of parts has been lightly added to over the last year.
We found that more choice of parts made him less inventive.
But lately he has shown more prowess.
In a constant bid to impress us, the creations have become more intricate
and compelling.
It was time to step up the game.
 







In a bid to get him working on numeracy and literacy,
we have kept our eye open for tasks that allow us to sneak lessons into to something that is just plain fun.
And although Lego doesn't really fit that bill well, there is an abundance of developmental exercises and typical subjects involved that could be focused on as part of a learning program.
Project based learning allows a child to work through a challenge and emerge with new skills at the end.
Lego happens to encompass some valuable lessons and we will be capitalizing on Auren's love of Lego play to encourage new skills.
 







A contemporary argument against Lego is that the new kits preclude creativity by structuring the play excessively as well as by associating with popular films and characters.
I must admit my aversion to movie themed Lego, but the other argument assumes that parents leave kits intact.
Our method is simple.
Build it according to the instructions first, then modify it, then break it down to add to the selection of parts intended for free play and creation.
That way, there is the benefit of folllowing instruction, as well as breaking the mold in favour of creativity.
 






For Christmas, we bought Auren a massive and complicated kit.
The goal is the buiding and not the completion.
Within the kit there are complex geared mechanisms, an electric motor, pneumatically controlled cylinders, and over 2000 parts.
This build will be slow and methodical.
There will be discussion involving mathematics, size, shape, electricity, physics, pneumatics, gear ratios, problem solving, and whatever else crops up during the process.
It is also Daddy time which little boys need to stay focused and motivated.


We started with a little kit first as a warm up.
Auren will be doing all of the building;
I am facilitating.
(Perhaps also building the kit vicariously for the sake of the little boy inside the man.)
He was able to complete the little truck without much trouble, carefully following the instructions.
Once time and space availed to us, it was time to open the big box.
 







Organizational skill is key to a mechanical project like this.
If you keep everything straight, the job is as simple as 1,2,3.
The challenge is staying focused and persevering to the end.
But like I said, the journey is the fun and the final project will likely only stay in one piece for a day or maybe two.
Having built it, Auren will be armed with new insight on developing whatever creations his mind can conjure.
In fact, this product line lends itself very well to modification as well as upping the ante with robotics and additional power options.
There is even a line of renewable energy projects.
All of which contribute to an innovative mind.
 







The attention span of little boys is notoriously short.
But that's not because there isn't the capacity.
They simply need the motivation;
the most powerful being one-on-one time with someone they love.
Using toys for educating works great, but not simply because something is deemed educational.
It's important to tap into a natural inclination and make the best of established interests.


I am excited about this build for many reasons.
To spend time with Auren.
To watch him learn and grow before my eyes.
To help build a really awesome Lego kit.
But I am even more excited and curious to see what gets built after it's all done,
when he gets to build his own creations.






 
 
 

Friday, 21 December 2012